Posts Tagged ‘ space work ’

Storage Tank Cleaning Safety

Storage tank cleaning safety is the most important aspect that needs to be considered deeply before doing tank cleaning work. This applies for all storage tanks. In addition, special consideration should be given for tank that is used for storing highly flammable and toxic chemicals.

The following tank cleaning safety tips will help you preventing work accident because of doing this work. Please read those tips carefully and improve your preparation when you find that you have left something.

But, my very first recommendation is to read MSDS or material safety data sheet of chemical contained in the storage tank. Make sure that you have understood precisely about all aspect associated with that chemical. (more…)

Tags: , , ,

Plant Turn Around Safety Tips

Plant Turn Around or yearly maintenance is a very big event, where almost all equipments will be opened for overhaul. This is the time when a ton of works are carried out at the same time based on a planned schedule, with a large numbers of workers. In this occasion, a group of people from third party also work in your plant site.

There are many types of works and operations carried out at that time. Chemical cleaning, welding, brushing, confined space works, tank clean up, piping modification, work at elevated height, leak test, hydrostatic pressure test, catalyst discharging, catalyst burning operation, and many more. All of those works contains potential risks. If it is not treated properly, then it will result work accidents.

In this case, safety aspect should be treated properly in order to prevent work accidents. Because a lot of works are carried out at the same time, naturally each work will link which each other. So it is very important to make sure safety aspect of each work and not to become hazards source for other works. (more…)

Tags: , , , ,

An Introduction to A 5-Minutes Safety Talk

free-safety-talks According to, safety talk is a hands-on way to remind workers that health and safety are important on the job. While describes safety talk as a brief meeting held on regular basis with workers and their supervisors to discuss problems and concerns about health and safety. Principally, safety talk deals with specific topic, subject and problem which are health and safety related in the workplace.

The objectives of a safety talk are to remind workers about potential hazards in their workplaces and help workers to recognize and control these hazards.

Safety talks are best delivered by people who are responsible for workers’ safety and health. They may be supervisors, health and safety officers, members of safety committee or anyone with health and safety duties. Even in some companies every worker is scheduled to give safety talk, in order to maintain safety awareness among them.

So what kind of message should we deliver during safety talk? Are there any standard messages? Basically there are no standard safety talk messages. As long as we choose a specific topic, subject or problem which relate to health and safety in the workplace, it will be enough. But the important point is safety talk message has to be well prepared, because it should be finished in about 5 minutes. Please check this page for safety talk example.

Now it is the time to set up safety talk schedule. We can perform it once a week, three times a week or once a day. It merely depends on company’s OHS policy, job risks, workplace conditions and worker’s skills.

Choose most appropriate location where we will do safety talk. Wherever possible, choose the real workplace, or at least as close as possible to the real workplace. For instance, if we would like to perform safety talk about confined space work hazards, do it at a tank, at an opened reactor column or near a vessel.

If possible use real tools, equipments, materials (for example chemicals), procedures and work conditions to demonstrate key points of the safety talk we are talking about, and to make it is easy to be understood.

Don’t forget to make a safety talk record. Record the date, location, leader, attendants and the topic. Make sure that all attendants have signed on the attendant list. Also make a copy of the safety talk material and keep it together with the records for future reference.

Finally, I would like to stress that although safety talks only take 5 minutes to finish, but it helps employers and workers to remind importance of health and safety, recognize and control hazards, and keeps workers awareness alive. Remember, there are much potential hazards inside chemical plant.

Tags: , , , , ,

Subscribe To Updated News & Offers